Washing
Your bamboo nappies will increase absorbency after the first 4-6 washes. The first few times you use your nappies you may need to change more regularly until they reach full absorbency. Soaking overnight in fresh water before the first pre-wash can speed the process up.
It’s recommended that you avoid bleaches and other harsh washing detergents when washing your nappies and wash on a cold setting or if using hot wash a max 45 deg. The nappies can be put in the dryer however we recommend limited use of the dryer and only on low to med heat setting for 10mins, line drying with limited direct sun exposure especially during summer where its recommended drying in the shade.
When preparing for washing ensure you firmly place the velcro tab to the washing tab as this will protect the nappies and the rest of your washing.
Damages that results from incorrect washing routines or going against manufacturer recommendations will void any warranty
Fitting your Nappy
Mitch’n’Moo nappies are designed as a one size fits most, what this means is the nappy will grow with your baby. 
Using the front snaps you can change your nappy’s size to best fit your baby. We’ve found that it’s easier to remove the inserts before changing the size.
On the smallest setting you will only need 1 of the micro fiber inserts (either the small insert or fold the top down on the large) with the Worker Bee fold the top down and place the folded section to the front of the nappy.
Stuffing your Nappy
To stuff your nappy you should aim to have your absorbency in the key wet zones. Take the insert in one hand and insert completely into the nappy, as you remove your hand slowly pull the nappy and insert with your free hand. Ensure the insert is straight and flat in the nappy before placing on the baby as this will ensure the nappy works to it’s maximum absorbency
For a boy the main wet zone is in the front closer to the top of the nappy. When using the 2 inserts with the Mitch’n’Moo Original or adding additional boosters to either you should connect the inserts at the top.
For a girl the main wet zone is lower near the crutch of the nappy. When using the 2 inserts with the Mitch’n’Moo Original or adding additional boosters to either you should connect the inserts at the lower snaps.